Remote server do not show any events
-
-
One thing is button status, and another thing is performing actions across servers. Forget about fop2, first think on your setup locally. If you have two servers, you must have a dialplan that lets you dial from one server to the other and viceversa. In that dialplan, extensions MUST be unique and dial should be done directly with no prefixes if you plan to use fop2 to spy other servers extensions.
Your extension is on server A
The extension you intend to spy on is on server BIn that case, chanspy must be performed on server B, using Local/xxxx as the originator of the command, where xxxx is the extension you must dial from server B so your extension on server A rings. So, originatechannel for your extension must be set to Local/xxxx.
If on server A you dial yyyy to ring your extension, and on server B you dial xxxx, then it will not work with fop2 as you expect.
And finally, chanspy sometimes does not work. If the chanspy command is issued on the correct server, using local/xxx to ring the remote server extension, everything else is setup but you get no sound. then it is not a fop2 issue, but an asterisk/networking/chanspy issue. fop2 is the command center, once the command is launched, from then on is asterisk/network/setups.
Best regards,
-
as to the extension yes I dial the extension number I can in your system put a number click dial and my extension will dial the number on the remote server.
But my issue is channel spy this is a small asterisk appliance by www.zycoo.com zx50. Using Busybox running asterisk 1.4.4.
Hope you can help
-
I have tested each server individually and Remote server A can listen to extension hosted on their server using FOP2 hosted on server B and the same issue with server C we can do everything we can call between server A,B and C dialing XXX, XXX, XXX no YYY. Can see what they are doing on the buttons all events are working. I can hangup a conversation going on Server A from Server B where FOP2 is installed. But the only function that does not work is listening to the conversation.
What I did not understand from your prevues post is do I need to create the same extension as to server A on my FOP2 server B. i.e Server a is running ext 4XX server B is running ext 1XX and server C is running 2XX then I have IAX and SIP trunks between them do I need to recreate the extension on the FOP2 server I am confused ???
I also noticed that if I give an extension on server a lets say xxx
all I do not see any of the top left menu buttons Listen Dial transfer etc... even though I have it set to all in fop2.cfgI really need your help
-
Server A = 192.168.1.1, extensions 1XX
Server B = 192.168.1.2, extensions 2XXIn your dialplan you should be able to dial 1XX from any server extension so that specific extension rings on server A.
Fop2 button configuration:
[SIP/100] type=extension extension=100 context=from-internal server=192.168.1.1 originatechannel=Local/100@from-internal [SIP/200] type=extension extension=200 context=from-internal server=192.168.1.2 originatechannel=Local/200@from-internalWith that setup and FOP 2.24, you should be able to Listen to 200 in server B from 100 in server A and viceversa.
And if you want to see the action buttons, you must have a fop2 user defined for every extension on every server
user=100:password:all
user=200:password:allAnd both 100 and 200 should be visible for the user in their extension list. If you log as an extension that does not have a matching button, you will not see the action buttons in the toolbar.
Best regards,
-
How do I find out what version I have I got your 2.0 version I think if I need an upgrade please tell me how. I have Trixbox
as to the setting that is what I have here is a button
[SIP/408]
type=extension
extension=408
label=Noemie Blanbette
mailbox=408@default
context=from-internal
extenvoicemail=*408@defaultHere is the setting in fop2.cfg
; USER LISTso we modified the button to be
[SIP/101]
type=extension
extension=101
label=toto Chevalier
mailbox=101@default
context=from-internal
extenvoicemail=*101@default
server=xxx.xxx.xxx.xxx
originatechannel=Local/101@from-internal
user=408:1255:all -
-
-
To upgrade:
Backup your /usr/local/fop2 and /var/www/html/fop2 directories, so you have a separate backup just in case.
Try to rememeber your customized files, as you might need to restore them after the upgrade, like FOP2Callbacks.pm or js/presence.js, buttons.cfg, etc. the fop2.cfg file will not be replaced.
Then download version 2.24, extract the tarball, cd fop2 and run "make"
Then restore your customized files, or make a diff between the new ones and the old ones to check for differences.
Remember that upgrades are free for one year, after that, the upgrade cost is $20 (annual maintenance fee on www.fop2.com/buy.php ).
Best regards,
-
-
-
I cannot give you a direct link as I do not know your linux distribution. Look at the download page and choose yours:
-
I am stuck when I try to run the license upgrade I get can not liten on port 4445. And when I tyoe make in the new FOP2 install directory I get
Reactivation failed! (EXPIRED)
Upgrade Aborted. License reactivation failed.
Be sure you have internet access from this server,
and that your code is not older than a year.If your license has expired, you must renew it in order to upgrade,
but you can still use your current FOP2 version for as long as you want.If you already bought an upgrade code please run the following command:
server/fop2_server --upgrade
If the upgrade is successful run make again to retry the installation.
Contact us at <!-- e --><a href="mailto:sales@asternic.biz">sales@asternic.biz</a><!-- e --> for more information.
Done!
[trixbox1.localdomain fop2]# -
-
-
-
-
I usually go to sleep, take dinner, a shower, I spend a little time with my family, etc. It's been a while since I unpluged the wire that sends emails directly to my brain.
I hope you can write a post later explaining the solution I provided after giving you free remote support for several hours.
-
As I said you rock man you have the absolute best support. I got everything going still have some issue but I will let you unplug and wait for you to get back to me, I also noticed that you have added an option next to the phone books to listen to recorded calls but when I click obit it's empty. The whisper allows you to listen occross servers thanks to you but can not whisper whom server A to C but does work from A to B
Again thanks for all of the help and promise to send a lot of customers your way.
best wishes
-
I have purchased 2 additional licenses and am writing you and you are not responding. I had a server crash can not connect to database after installing FOP@ so I rebuilt a new one in a better machine but I activated the license on the old server and need to change that on the new server. Please help
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login