toolbar buttons nothing happens upon click (SOLVED)
-
Not sure what to answer as you are not showing your button file....
Anyways, as I previosuly mentioned there is a bug in the record action that prevents the system from start recording if the call was up before you start fop2_server. If the call is made after fop2 starts then you won't have that problem.
And it would be better to have a debug level 15 to see the commands between the web client and fop2 server too.
Also record works on bridged calls, if the call is not bridged it will fail.
Best regards,
-
sorry about that (me not following directions)
for the extensions I have up here is my button.cfg:[SIP/6910]
type=extension
extension=6910
label=POTS 1
mailbox=jmituzas@gmail.com
context=from-internal
extenvoicemail=*6910@device[SIP/6920]
type=extension
extension=6920
label=POTS 2
mailbox=jmituzas@gmail.com
context=from-internal
extenvoicemail=*6920@device[SIP/6930]
type=extension
extension=6930
label=POTS 3
mailbox=6930@device
context=from-internal
extenvoicemail=*6930@device[SIP/6940]
type=extension
extension=6940
label=POTS 4
mailbox=6940@device
context=from-internal
extenvoicemail=*6940@device[DAHDI/1]
type=trunk
label=DAHDI
channel=DAHDI/3
channel=DAHDI/4
ok start the fop2 in debug mode and trial to dial another extension:
/usr/local/fop2/fop2_server -X 1510.30.20.137 => <?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" to-ports="4444" />
</cross-domain-policy>** CLEAN SOCKET connection lost removing socket IO::Socket::INET=GLOB(0xec6d730)
** CLEAN SOCKET flash client connection lost
No flash clients connected10.30.20.137 <= <msg data="GENERAL|contexto|1|" />
10.30.20.137 => { 'btn': '0', 'cmd': 'key', 'data': 'UaOOw2cpN8ysPsC6cZn9nR7z4gL', 'slot': '' }10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'version', 'data': '2.00', 'slot': '' }
10.30.20.137 <= <msg data="1|auth|6910|7049c25fd66678daffafc348c3a2c654" />
10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'permit', 'data': 'YWxs', 'slot': '' }10.30.20.137 => { 'btn': '16@GENERAL', 'cmd': 'zbuttons', 'data': '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', 'slot': '' }
10.30.20.137 <= <msg data="1|initState||7049c25fd66678daffafc348c3a2c654" />
10.30.20.137 => { 'btn': '1@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }10.30.20.137 => { 'btn': '2@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '3@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '4@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '5@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '6@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '7@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '8@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '9@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '10@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'settext', 'data': '', 'slot': '0' }
10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'state', 'data': 'DOWN', 'slot': '0' }
10.30.20.137 <= <msg data="11|originate|12|7049c25fd66678daffafc348c3a2c654" />
127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: SIP/6910
127.0.0.1 -> Exten: 6920
127.0.0.1 -> Context: from-internal
127.0.0.1 -> Priority: 1
127.0.0.1 -> CallerID: <6910>
127.0.0.1 -> Async: True127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Originate successfully queued
127.0.0.1 <- Server: 0Response: Success
Message: Originate successfully queued
Server: 0127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel:
127.0.0.1 <- State: Down
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260845705.0
127.0.0.1 <- Server: 0127.0.0.1 <- Event: OriginateResponse
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Response: Failure
127.0.0.1 <- Channel: SIP/6910
127.0.0.1 <- Context: from-internal
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Reason: 0
127.0.0.1 <- Uniqueid: <null>
127.0.0.1 <- CallerID: 6910
127.0.0.1 <- CallerIDNum: 6910
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Server: 0
heres what it looks like when on the phone dial another extension:
127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: EXTTOCALL=6920
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 5
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFUEXT=
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 6
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFBEXT=
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: RT=15
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 8
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: record-enable|6920|IN
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?check
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: recordingcheck|20091214-220142|1260846095.2
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 999
127.0.0.1 <- Application: MixMonitor
127.0.0.1 <- AppData: /recordings20091214-220142-1260846095.2.wav||
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 9
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: dial|15|tr|6920
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?dial
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 3
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: dialparties.agi
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Dial
127.0.0.1 <- AppData: DAHDI/6|15|tr
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Rsrvd
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Dial
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Source: DAHDI/5-1
127.0.0.1 <- Destination: DAHDI/6-1
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- SrcUniqueID: 1260846095.2
127.0.0.1 <- DestUniqueID: 1260846102.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newcallerid
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <Unknown>
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- CID-CallingPres: 0 (Presentation Allowed, Not Screened)
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260846102.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260846095.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Link
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel1: DAHDI/5-1
127.0.0.1 <- Channel2: DAHDI/6-1
127.0.0.1 <- Uniqueid1: 1260846095.2
127.0.0.1 <- Uniqueid2: 1260846102.3
127.0.0.1 <- CallerID1:
127.0.0.1 <- CallerID2: 6920
127.0.0.1 <- Server: 0
highlight 6910 press record:
10.30.20.137 <= <msg data="11|record|11|152f109c512015a15e78c580917db111" />
127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6910-1260846264
127.0.0.1 -> Async: True127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
highlight 6920 press record:
10.30.20.137 <= <msg data="11|record|12|152f109c512015a15e78c580917db111" />
127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6920-1260846321
127.0.0.1 -> Async: True127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
hope I have posted enough information this time.
All of this was done after I have started fop2 in debug mode.
Thanks in advance, -
-
Ok... I think you have the #exec autoconfig-buttons-freepbx.sh defined in your fop2.cfg altough you want to do a manual config... remove that line in fop2.cfg or comment it out so it looks like ";#exec ....".
The button.cfg you copied here does not match the events in the log.
-
ok have done that and manually changed my button.cfg from SIP/6910 to DAHDI/6910 same as extensions 6920, 6930, and 6940 for those are extensions to the POTS lines directly.
Now when I log in as extension 6910 and try to dial extension 6920 it still fails and I get this:
10.30.20.137 <= <msg data="GENERAL|contexto|1|" />
10.30.20.137 => { 'btn': '0', 'cmd': 'key', 'data': '5tyRgiPJIYPw0lrCE4ie', 'slot': '' }10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'version', 'data': '2.00', 'slot': '' }
10.30.20.137 <= <msg data="1|auth|6910|397983a2c91e3c583334454a1fe1d406" />
10.30.20.137 => { 'btn': '0@GENERAL', 'cmd': 'permit', 'data': 'YWxs', 'slot': '' }10.30.20.137 => { 'btn': '16@GENERAL', 'cmd': 'zbuttons', 'data': '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', 'slot': '' }
10.30.20.137 <= <msg data="1|initState||397983a2c91e3c583334454a1fe1d406" />
10.30.20.137 => { 'btn': '1@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }10.30.20.137 => { 'btn': '2@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '3@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '4@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '5@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '6@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '7@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '8@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '9@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '10@GENERAL', 'cmd': 'qualify', 'data': 'notok', 'slot': '0' }
10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'settext', 'data': '', 'slot': '0' }
10.30.20.137 => { 'btn': '15@GENERAL', 'cmd': 'state', 'data': 'DOWN', 'slot': '0' }
10.30.20.137 <= <msg data="11|originate|12|397983a2c91e3c583334454a1fe1d406" />
127.0.0.1 -> Action: Originate
127.0.0.1 -> Channel: DAHDI/6910
127.0.0.1 -> Exten: 6920
127.0.0.1 -> Context: from-internal
127.0.0.1 -> Priority: 1
127.0.0.1 -> CallerID: <6910>
127.0.0.1 -> Async: True127.0.0.1 <- Response: Success
127.0.0.1 <- Message: Originate successfully queued
127.0.0.1 <- Server: 0Response: Success
Message: Originate successfully queued
Server: 0127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel:
127.0.0.1 <- State: Down
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260904100.1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: OriginateResponse
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Response: Failure
127.0.0.1 <- Channel: DAHDI/6910
127.0.0.1 <- Context: from-internal
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Reason: 0
127.0.0.1 <- Uniqueid: <null>
127.0.0.1 <- CallerID: 6910
127.0.0.1 <- CallerIDNum: 6910
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Server: 0
when I dial the extension from the phone itself I get this (sorry can't copy this in its entire I'm within an ssh session:
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: VMBOX=6920
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: EXTTOCALL=6920
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 5
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFUEXT=
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 6
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: CFBEXT=
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Set
127.0.0.1 <- AppData: RT=15
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 8
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: record-enable|6920|IN
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?check
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 4
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: recordingcheck|20091215-141123|1260904276.2
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-record-enable
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 999
127.0.0.1 <- Application: MixMonitor
127.0.0.1 <- AppData: /recordings20091215-141123-1260904276.2.wav||
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-exten-vm
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 9
127.0.0.1 <- Application: Macro
127.0.0.1 <- AppData: dial|15|tr|6920
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 1
127.0.0.1 <- Application: GotoIf
127.0.0.1 <- AppData: 1?dial
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 3
127.0.0.1 <- Application: AGI
127.0.0.1 <- AppData: dialparties.agi
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newexten
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- Context: macro-dial
127.0.0.1 <- Extension: s
127.0.0.1 <- Priority: 7
127.0.0.1 <- Application: Dial
127.0.0.1 <- AppData: DAHDI/6|15|tr
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newchannel
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Rsrvd
127.0.0.1 <- CallerIDNum: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Dial
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Source: DAHDI/5-1
127.0.0.1 <- Destination: DAHDI/6-1
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- SrcUniqueID: 1260904276.2
127.0.0.1 <- DestUniqueID: 1260904283.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newcallerid
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <Unknown>
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- CID-CallingPres: 0 (Presentation Allowed, Not Screened)
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Ringing
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 8
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/6-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: 6920
127.0.0.1 <- CallerIDName: <unknown>
127.0.0.1 <- Uniqueid: 1260904283.3
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Newstate
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel: DAHDI/5-1
127.0.0.1 <- State: Up
127.0.0.1 <- CallerID: <unknown>
127.0.0.1 <- CallerIDName: Free For All Incorporated
127.0.0.1 <- Uniqueid: 1260904276.2
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6920
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6010
127.0.0.1 <- Context: default
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: ExtensionStatus
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Exten: 6910
127.0.0.1 <- Context: ext-local
127.0.0.1 <- Status: 1
127.0.0.1 <- Server: 0127.0.0.1 <- Event: Link
127.0.0.1 <- Privilege: call,all
127.0.0.1 <- Channel1: DAHDI/5-1
127.0.0.1 <- Channel2: DAHDI/6-1
127.0.0.1 <- Uniqueid1: 1260904276.2
127.0.0.1 <- Uniqueid2: 1260904283.3
127.0.0.1 <- CallerID1:
127.0.0.1 <- CallerID2: 6920
127.0.0.1 <- Server: 0
now when I press record I get this:
10.30.20.137 <= <msg data="11|record|11|577da20107f5723e91f7cdd1fffc5c0c" />127.0.0.1 -> Action: Monitor
127.0.0.1 -> Channel:
127.0.0.1 -> ActionID: monitor-Monitor-
127.0.0.1 -> Mix: 1
127.0.0.1 -> File: 6910-1260904442
127.0.0.1 -> Async: True127.0.0.1 <- Response: Error
127.0.0.1 <- ActionID: monitor-Monitor-
127.0.0.1 <- Message: No channel specified
127.0.0.1 <- Server: 0
This is getting to be very frustrating, many hours put into this and nothing works.
I am wondering where did I mess this up so bad. Is it from FOP2, my FreePBX setup or is it my Asterisk configuration files. I really wish that AsteriskNOW upon adding all these apps would have better documentation. I am starting to think that your app is fine because I have also set and wrote to the FreePBX forums as well regarding recording all incoming and outgoing calls. FreePBX doesn't record either and is setup to always record all calls for all extensions. Which leaves me to believe that it may be an Asterisk permission problem, but I have stated within the manager.conf file to grant permissions to these extensions as well as the manager, so I am at a complete loss.I know better then to post the problems of other apps in this forum, and I thank you for your many responses since I get no feedback when I post to the FreePBX, or the AsteriskNOW forums regarding this issue.
Thanks again for your prompt replies!
Maybe you could give me some more options to try and troubleshoot
oh by the way, how do I exit debug mode, have tried exit, quit, -q, /q ? have been closing my session then logging back in to reboot. There has to be a better way. -
ctrl-C to exit
DAHDI/39030303 does not exists, your dahdi channels are 5 and 6 from your logs... You can catch me online on the live help and give me access to your server, we can fix it together in no time. Much less time than writing endless posts in the forum with funky configs.
As you have DAHDI fxs channles, you have to use manual config for them right now or fix/patch the autoconfig script for adding them there as extensions and not trunk.
The frustration comes from not understaning how the configuration works, and not posting your config fully. Please come online and chat with me.. it would be MUCH quicker for you and for me.
-
-
I am having the same problem as the original poster--none of the buttons works except for hangup.
This is on a more or less virgin Trixbox 2.8.0.3 installation (Asterisk 1.6.0.10). I've enabled the extension I am logging in with to have "all" permissions in the FOP2Admin module.
I do not have a buttons.cfg file, as I am using the autoconfig-users-freepbx.sh file. The manager and secret in fop2.cfg are properly matched to manager.conf.
Here are some excerpts from the debug log immediately after I try to click on some of the non-functional buttons:
10.10.8.111 <= <msg data="14|originate|14|cc6911c5d086d504a994dec25a27e0af" /> 127.0.0.1 -> Action: Originate 127.0.0.1 -> Channel: SIP/243 127.0.0.1 -> Exten: 243 127.0.0.1 -> Context: from-internal 127.0.0.1 -> Priority: 1 127.0.0.1 -> CallerID: [name] <243> 127.0.0.1 -> Async: True 127.0.0.1 <- Response: Error 127.0.0.1 <- Message: Permission denied 127.0.0.1 <- Server: 0 Response: Error Message: Permission denied Server: 0 ----- 10.10.8.111 <= <msg data="14|towhisper|14|cc6911c5d086d504a994dec25a27e0af" /> 127.0.0.1 <- Event: PeerStatus 127.0.0.1 <- Privilege: system,all 127.0.0.1 <- ChannelType: SIP 127.0.0.1 <- Peer: SIP/231 127.0.0.1 <- PeerStatus: Registered 127.0.0.1 <- Server: 0 ----- 127.0.0.1 <- Event: PeerStatus 127.0.0.1 <- Privilege: system,all 127.0.0.1 <- ChannelType: SIP 127.0.0.1 <- Peer: SIP/237 127.0.0.1 <- PeerStatus: Registered 127.0.0.1 <- Server: 0 127.0.0.1 <- Event: PeerStatus 127.0.0.1 <- Privilege: system,all 127.0.0.1 <- ChannelType: SIP 127.0.0.1 <- Peer: SIP/234 127.0.0.1 <- PeerStatus: Registered 127.0.0.1 <- Server: 0 ----- 10.10.8.111 <= <msg data="14|towhisper|12|2d80cea36d9bdc4535c47e7ba7c22db6" /> ----- 10.10.8.111 <= <msg data="14|towhisper|12|2d80cea36d9bdc4535c47e7ba7c22db6" /> 10.10.8.111 <= <msg data="1|ping||" /> 10.10.8.111 => { 'btn': '0', 'cmd': 'pong', 'data': '0', 'slot': '' }I hope we can get this working, as I just bought FOP2 and am impressed with what it shows and the interface!
-
The "all" permission must be applied in /etc/asterisk/manager.conf . It is NOT a fop2 permission, but an Asterisk manager permission.
You will be able to perform other commands if you add that to the manager user you are using in fop2.cfg, most probably "admin"
Best regards,
-
I tried replacing read = system,call,log,verbose,command,agent,user and write = [the same] with read = all and write = all. I still can't do listen or whisper, but the system is at least now responding to the Dial, Pickup, Transfer, and Transfer to Voicemail options.
Here is the only line that appears in the Debug mode when I click "Whisper":
10.10.8.115 <= <msg data="14|towhisper|12|c3a8877fb35e1b910870cb61a91263ef" />A similar line appears when I click "Listen."
Here is the contents of manager.conf (I changed the permissions back to the default in case they were screwing things up):
; ; Asterisk Call Management support ; [general] enabled = yes port = 5038 bindaddr = 0.0.0.0 [admin] secret = ***** deny=0.0.0.0/0.0.0.0 permit=127.0.0.1/255.255.255.0 read = all write = all #include manager_additional.conf #include manager_custom.confAnd here is fop2.cfg:
[general] ; AMI definitions manager_host=localhost manager_port=5038 manager_user=admin manager_secret=***** [same as in manager.conf] ;event_mask=call,agent ; Daemon definitios ;listen_port = 4445 ;restrict_host = www.asternic.org ;web_dir = /var/www/html/operator/fop2 ; Global Config language = en poll_interval = 86400 poll_voicemail = 1 monitor_ipaddress = 0 ; Force blind transfer on asterisk 1.6 blind_transfer = 1 ; Force supervised transfer on asterisk 1.4 ; requires the atxfer manager backport patch ; supervised_transfer = 1 ; Force delimiter for asterisk applications ; force_parameter_delimiter = "," ; When adding or removing members to a queue, fop2 will default to ; AddQueueMember/RemoveQueueMember commands. If you set use_agentlogin ; to 1, together with the QueueChannel in a button definition set to ; an Agent number it will use AgentCallbackLogin and Agentlogoff instead. ; ; use_agentlogin = 0 ; Master Password that overrides any individual one ;master_key = [default] ; Filename to use when start monitoring, you can use ${UNIQUEID}, ; ${ORIG_EXTENSION}, ${DEST_EXTENSION} ; and date formats %Y %m %d to construct the filename. ; ; Settings for modifying the recording filename ; Available variables are: ; ${UNIQUEID} = Unique Id of the call ; ${TIMESTAMP} = Unix Timestamp when the recording was initiated ; ${DEST_EXTENSION} = Target extenstion being monitored ; ${ORIG_EXTENSION} = Extension/User that started the recording (not ; the other leg) ; Date variables: ; %Y 4 digits year ; %y 2 digits year ; %m 2 digits month ; %d 2 digits day ; %h 2 digits hour ; %i 2 digits minute ; %s 2 digits seconds monitor_filename=g${DEST_EXTENSION}-${UNIQUEID} monitor_format=wav monitor_mix=true ; --- SAMPLE GROUPS --- ;group=queues:QUEUE/100,QUEUE/101 ;group=deptA:SIP/100,SIP/101,SIP/102 ; --- END SAMPLE --- ; --- SAMPLE USER LIST --- ; format: user= EXTENSION : SECRET : PERMISSIONS : GROUPS ; You can enumerate several permissions and groups separated by comma ; available permissions: 'all', 'dial', 'hangup', 'meetme', 'pickup', ; 'record', 'spy', 'transfer', 'whisper', ; 'queuemanager', 'queueagent', 'phonebook' ; ;user=620:1234:all:queues ;user=621:1234:dial,transfer,pickup:deptA ;user=622:1234:all ;user=623:1234:meetme,pickup ;buttonfile=buttons.cfg ; ------ END SAMPLE ------ ; This line is NOT commented, it executes ; the autoconfig configuration for FreePBX #exec autoconfig-users-freepbx.shUsers and permissions are set in fop2admin. I have the users I am testing with set for "all" permissions, and the extensions I am trying to monitor set to "none". (The way the mouseover text for the Privacy column in fop2admin reads, it is hard to tell, but I think "none" means "no restrictions" and therefore it should work, whereas "all" means "all things restricted. Regardless, I tried it with all and nothing happened.)
I have tried with Firefox, IE, and Google Chrome, just in case it is a browser issue.
-
You first had incorrect permissions in the manager user. Now you have another problem. Both listen and whisper use chanspy to work, and the command is properly sent between the client and server, you will need to inspect the manager events from and to asterisk ( -> <- in the logs), and the asterisk full log in order to look for problems with chanspy. There are some asterisk versions where chanspy is broken( 1.4.26 or something like that). You can incresease the debug log to -X 511 and also inspect the asterisk full log or console
Best regards,
-
You first had incorrect permissions in the manager user. Now you have another problem. Both listen and whisper use chanspy to work, and the command is properly sent between the client and server, you will need to inspect the manager events from and to asterisk ( -> <- in the logs), and the asterisk full log in order to look for problems with chanspy. There are some asterisk versions where chanspy is broken( 1.4.26 or something like that). You can incresease the debug log to -X 511 and also inspect the asterisk full log or console
Best regards,
OK. Two problems at once is always hard to fix!
Here is my -X 511 output:
** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPRECEIVED 0 ** MAIN AMI event received... ** MAIN Processing command received from flash clients... 10.10.8.111 <= <msg data="15|towhisper|12|f530f3d19ae1d9b661e9102167c3abad" /> -- PROCESS_FLASH_COMMAND origen 15 accion towhisper destino 12 -- PROCESS_FLASH_COMMAND password [string] VALIDAR USUARIO 244 Validation ok, have all permissions TO WHISPER permission denied, privacy in destination button! ** MAIN End of block from localhost 127.0.0.1 <- Event: RTCPSent 127.0.0.1 <- Privilege: reporting,all 127.0.0.1 <- To: 172.16.8.196:3001 127.0.0.1 <- OurSSRC: 930506050 127.0.0.1 <- SentNTP: 1280220188.3181875200 127.0.0.1 <- SentRTP: 930497584 127.0.0.1 <- SentPackets: 1249 127.0.0.1 <- SentOctets: 199840 127.0.0.1 <- ReportBlock: 127.0.0.1 <- FractionLost: 0 127.0.0.1 <- CumulativeLoss: 0 127.0.0.1 <- IAJitter: 0.0000 127.0.0.1 <- TheirLastSR: 2879153766 127.0.0.1 <- DLSR: 3.0790 (sec) 127.0.0.1 <- Server: 0Only one line was output in /etc/log/asterisk/full:
[Jul 27 00:43:11] VERBOSE[12757] logger.c: == Manager 'admin' logged off from 127.0.0.1And this didn't repeat on subsequent clicks, so I don't think it's related.
It appears the log is saying the button has privacy enabled. I went into fop2admin and changed privacy from "all" to "none" (note, it might be better to clarify the mouseover text in future releases of fop2admin). After dong that, the logs changed to this:
** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPSENT 0 ** MAIN End of block from localhost 127.0.0.1 <- Event: RTCPSent 127.0.0.1 <- Privilege: reporting,all 127.0.0.1 <- To: 172.16.8.198:3001 127.0.0.1 <- OurSSRC: 1999275949 127.0.0.1 <- SentNTP: 1280220498.3180355584 127.0.0.1 <- SentRTP: 22756960 127.0.0.1 <- SentPackets: 16751 127.0.0.1 <- SentOctets: 2680160 127.0.0.1 <- ReportBlock: 127.0.0.1 <- FractionLost: 0 127.0.0.1 <- CumulativeLoss: 0 127.0.0.1 <- IAJitter: 0.0000 127.0.0.1 <- TheirLastSR: 2899427328 127.0.0.1 <- DLSR: 2.6380 (sec) 127.0.0.1 <- Server: 0 ** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPSENT 0 ** MAIN AMI event received... ** MAIN Processing command received from flash clients... 10.10.8.111 <= <msg data="15|tospy|12|0c1144c012fcdc1c4cd7092df3146c44" /> -- PROCESS_FLASH_COMMAND origen 15 accion tospy destino 12 -- PROCESS_FLASH_COMMAND password [string] VALIDAR USUARIO 244 Validation ok, have all permissions Not a reference at all Not a reference at all TO SPY SIP/244 no definido! ** MAIN End of block from localhost 127.0.0.1 <- Event: RTCPReceived 127.0.0.1 <- Privilege: reporting,all 127.0.0.1 <- From: 172.16.8.196:3001 127.0.0.1 <- PT: 200(Sender Report) 127.0.0.1 <- ReceptionReports: 1 127.0.0.1 <- SenderSSRC: 0 127.0.0.1 <- FractionLost: 0 127.0.0.1 <- PacketsLost: 0 127.0.0.1 <- HighestSequence: 49947 127.0.0.1 <- SequenceNumberCycles: 0 127.0.0.1 <- IAJitter: 0 127.0.0.1 <- LastSR: 7122.0536870912 127.0.0.1 <- DLSR: 1.9000(sec) 127.0.0.1 <- RTT: 10(sec) 127.0.0.1 <- Server: 0 ** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPRECEIVED 0 ** MAIN End of block from localhost 127.0.0.1 <- Event: RTCPReceived 127.0.0.1 <- Privilege: reporting,all 127.0.0.1 <- From: 172.16.8.198:3001 127.0.0.1 <- PT: 200(Sender Report) 127.0.0.1 <- ReceptionReports: 1 127.0.0.1 <- SenderSSRC: 0 127.0.0.1 <- FractionLost: 0 127.0.0.1 <- PacketsLost: 0 127.0.0.1 <- HighestSequence: 1186 127.0.0.1 <- SequenceNumberCycles: 0 127.0.0.1 <- IAJitter: 0 127.0.0.1 <- LastSR: 7122.1342177280 127.0.0.1 <- DLSR: 2.3500(sec) 127.0.0.1 <- RTT: 11(sec) 127.0.0.1 <- Server: 0 ** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPRECEIVED 0 ** MAIN AMI event received... ** MAIN Processing command received from flash clients... 10.10.8.111 <= <msg data="15|towhisper|15|0c1144c012fcdc1c4cd7092df3146c44" /> -- PROCESS_FLASH_COMMAND origen 15 accion towhisper destino 15 -- PROCESS_FLASH_COMMAND password [string] VALIDAR USUARIO 244 Validation ok, have all permissions Not a reference at all Not a reference at all TO WHISPER SIP/244 no definido! ** MAIN AMI event received... ** MAIN Processing command received from flash clients... 10.10.8.111 <= <msg data="15|tospy|15|0c1144c012fcdc1c4cd7092df3146c44" /> -- PROCESS_FLASH_COMMAND origen 15 accion tospy destino 15 -- PROCESS_FLASH_COMMAND password [string] VALIDAR USUARIO 244 Validation ok, have all permissions Not a reference at all Not a reference at all TO SPY SIP/244 no definido! ** MAIN End of block from localhost 127.0.0.1 <- Event: RTCPSent 127.0.0.1 <- Privilege: reporting,all 127.0.0.1 <- To: 172.16.8.196:3001 127.0.0.1 <- OurSSRC: 930506050 127.0.0.1 <- SentNTP: 1280220503.3180752896 127.0.0.1 <- SentRTP: 933017584 127.0.0.1 <- SentPackets: 16999 127.0.0.1 <- SentOctets: 2719840 127.0.0.1 <- ReportBlock: 127.0.0.1 <- FractionLost: 0 127.0.0.1 <- CumulativeLoss: 0 127.0.0.1 <- IAJitter: 0.0000 127.0.0.1 <- TheirLastSR: 2899797606 127.0.0.1 <- DLSR: 3.0900 (sec) 127.0.0.1 <- Server: 0 ** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPSENT 0 ** MAIN End of block from localhost 127.0.0.1 <- Event: RTCPSent 127.0.0.1 <- Privilege: reporting,all 127.0.0.1 <- To: 172.16.8.198:3001 127.0.0.1 <- OurSSRC: 1999275949 127.0.0.1 <- SentNTP: 1280220503.3180945408 127.0.0.1 <- SentRTP: 22796960 127.0.0.1 <- SentPackets: 17001 127.0.0.1 <- SentOctets: 2720160 127.0.0.1 <- ReportBlock: 127.0.0.1 <- FractionLost: 0 127.0.0.1 <- CumulativeLoss: 0 127.0.0.1 <- IAJitter: 0.0001 127.0.0.1 <- TheirLastSR: 2899755008 127.0.0.1 <- DLSR: 2.6380 (sec) 127.0.0.1 <- Server: 0 ** MAIN AMI event received... ** MAIN There's an 'Event' in the event block ** MAIN Event detected block_count = 0 ** MAIN There are 0 blocks for processing ** MAIN Answer block cleared ** DIGEST_EVENT: start ** PROCESA_BLOQUE RTCPSENT 0 Exiting...My Asterisk is 1.6.0.10 as part of Trixbox 2.8.0.3. Chanspy does work if I dial 555.
-
-
[quote]TO WHISPER permission denied, privacy in destination button!
You have set the privacy option to the destination button (this is a fop2 config option). Buttons with privacy cannot be spied on.
Best regards,[/quote]
I tried it both ways (set in fop2admin) and neither worked. The log in the second block of code I posted seems to indicate that my privacy settings are correct. Am I misreading something?
-
I have a similar problem. From the asterisk console, I get:
channel.c:5681 __ast_request_and_dial: Unable to request channel SIP/474_5091
The message goes out as follows:
Exten: 474_566
CallerID: 5091 <474_5091>
Action: Originate
Async: 1
Priority: 1
Channel: SIP/474_5091
Context: from_local_siptel_nat
ActionID: 8And is refused as follows:
Event: OriginateResponse
Privilege: call,all
ActionID: 8
Response: Failure
Channel: SIP/474_5091
Context: from_local_siptel_nat
Exten: 474_566
Reason: 0
Uniqueid: <null>
CallerIDNum: 474_5091
CallerIDName: 5091I suspect, but do not know for sure, that it's the CallerIDNum being 474_5091 that's the problem, in asterisk rejects calls with non-numeric CallerIDNum in them. manger.conf is set up as follows:
[admin]
secret = XXXXXXXXXXXXXXXXXXXXX
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read=system,call,log,agent,user,config,command,reporting,cdr,dialplan,originate,agi,cc,aoc,all
write=all,system,call,log,verbose,command,agent,user,originate,all[SIP/474_5091]
type=extension
extension=474_5091
context=dept_1226_some_shared_context
label=5091[SIP/474_566]
type=extension
extension=474_566
label=566
context=dept_1226_some_shared_context -
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login